Lumisight

Pegulicianine · Injection, Powder, Lyophilized, For Solution · Intravenous

Prescription (Rx)

Boxed warning. WARNING: ANAPHYLAXIS AND OTHER SERIOUS HYPERSENSITIVITY REACTIONS Serious hypersensitivity reactions, including anaphylaxis, can occur during or following administration of LUMISIGHT. Anaphylaxis occurred in 4/726 (0.6%) of patients in clinical studies. Signs and symptoms associated with other hypersensitivity reactions included pruritus, urticaria, hypotension, lip swelling, erythema, anxiety, chest pain, cyanosis, dizziness, dyspnea, headache, hypoesthesia, hyperventilation, maculopapular rash, nausea, paresthesia, visual changes, and vomiting. Before LUMISIGHT administration, assess all patients for any history of hypersensitivity reaction to contrast media or products containing polyethylene glycol (PEG). Always have emergency resuscitation drugs, equipment, and trained personnel promptly available. Monitor all patients for hypersensitivity reactions. If a hypersensitivity reaction…

Uses

1 INDICATIONS AND USAGE LUMISIGHT is indicated for fluorescence imaging in adults with breast cancer as an adjunct for the intraoperative detection of cancerous tissue within the resection cavity following removal of the primary specimen during lumpectomy surgery. LUMISIGHT is an optical imaging agent indicated for fluorescence imaging in adults with breast cancer as an adjunct for the intraoperative detection of cancerous tissue within the resection cavity following removal of the primary specimen during lumpectomy surgery. ( 1 )

Dosage and administration

Recommended dose of LUMISIGHT is 1 mg/kg by intravenous injection over 3 minutes administered 2 hours to 6 hours prior to imaging. ( 2.1 ) See Full Prescribing Information for instructions on preparation, administration, and imaging. ( 2.2 , 2.3 , 2.4 ) 2.1 Recommended Dose The recommended dose of LUMISIGHT is 1 mg/kg actual body weight by intravenous injection over 3 minutes administered 2 hours to 6 hours prior to imaging. 2.2 Preparation of LUMISIGHT Important Preparation Information Prior to reconstitution, store vials in the freezer at -25°C to -15°C (-13°F to 5°F). Protect from light. Use aseptic technique for the preparation of LUMISIGHT. The recommended dose depends on the individual patient’s weight. Multiple vials of LUMISIGHT may need to be reconstituted to achieve the individual patient dose. Only use 0.45% Sodium Chloride Injection, USP for reconstitution of LUMISIGHT to prevent high osmolality. Preparation Instructions Calculate the dose (1 mg/kg) and the total volume (mL) of LUMISIGHT based on the individual patient’s weight. Obtain the number of vials required to administer the patient dose. Allow the vials to acclimate to room temperature between 20°C to 25°C (68°F to 77°F) for approximately 5 minutes. Reconstitute each vial of LUMISIGHT with 4 mL of 0.45% Sodium Chloride Injection, USP to permit withdrawal of 3.9 mL of LUMISIGHT 10 mg/mL. Visually inspect the reconstituted solution. It should be a clear, dark blue-colored solution free of particulate matter. Discard if there is any discoloration or particulate matter. If not immediately used, store the reconstituted LUMISIGHT vial at room temperature at 20°C to 25°C (68°F to 77°F) and use within 4 hours, or store the reconstituted LUMISIGHT vial in the refrigerator at 2°C to 8°C (35°F to 46°F) and use within 24 hours. Protect from light. Each vial of LUMISIGHT is for a single dose. Discard unused portion. 2.3 Administration Withdraw the calculated volume from the appropriate number of vials into one syringe for administration of one single dose of 1 mg/kg. Verify that the syringe contains the intended volume. Prior to administration of LUMISIGHT, flush the peripheral intravenous (IV) line with 10 mL to 20 mL of 0.9% Sodium Chloride Injection, USP. Administer LUMISIGHT as an IV injection over 3 minutes beginning 2 hours to 6 hours prior to imaging with the Lumicell DVS. After administration of LUMISIGHT, flush the IV line with 10 mL to 20 mL of 0.9% Sodium Chloride Injection, USP. 2.4 Imaging LUMISIGHT is used with the Lumicell Direct Visualization System (DVS) or other fluorescence imaging device that is FDA-approved for specific use with pegulicianine in the indicated population. The device provides illumination to excite the fluorescent components of pegulicianine and collects images showing pegulicianine’s fluorescence emission. Regions suspected to contain cancerous tissue are highlighted as positive signals on the Lumicell DVS display [see Clinical Studies ( 14 )] . Training on the use of the device is essential prior to employing the system in a lumpectomy procedure. Please refer to the device labeling for details on how to use the device and for training information.

Dosage forms and strengths

For injection: dark blue lyophilized powder in a single-dose vial delivering 39 mg pegulicianine after reconstitution. For injection: lyophilized powder in a single-dose vial delivering 39 mg of pegulicianine after reconstitution. ( 3 )

Contraindications

4 CONTRAINDICATIONS LUMISIGHT is contraindicated in patients with a history of hypersensitivity reaction to pegulicianine. Reactions have included anaphylaxis [see Warning and Precautions (5.1) ] . History of hypersensitivity reaction to pegulicianine. ( 4 )

Warnings and precautions

Risk of Misdiagnosis : Absence of signal in the surgical field does not rule out the presence of cancer. Positive signal may be seen in non-cancerous tissue. ( 5.2 ) Interference from Dyes Used for Sentinel Lymph Node Mapping : Avoid administration of dyes before imaging the lumpectomy cavity in patients receiving LUMISIGHT. ( 5.3 , 7 ) 5.1 Anaphylaxis and Other Serious Hypersensitivity Reactions Prepare for the possibility of drug hypersensitivity reactions (including anaphylaxis), which can occur during or following administration, and take the necessary precautions. In clinical studies, 4 of 726 (0.6%) patients treated with LUMISIGHT experienced signs and symptoms consistent with anaphylaxis. The onset was during administration in three patients. Signs and symptoms associated with other hypersensitivity reactions included pruritus, urticaria, hypotension, lip swelling, erythema, anxiety, chest pain, cyanosis, dizziness, dyspnea, headache, hypoesthesia, hyperventilation, maculopapular rash, nausea, paresthesia, visual changes, and vomiting [see Adverse Reactions ( 6.1 )]. Before LUMISIGHT administration, assess all patients for any history of hypersensitivity reaction to contrast media or products containing polyethylene glycol (PEG), as these patients may have an increased risk for hypersensitivity reaction to LUMISIGHT. In clinical studies, three out of four patients that experienced anaphylaxis did not have a history of hypersensitivity reaction to contrast media or products containing PEG. Always have emergency resuscitation drugs, equipment, and trained personnel available. Monitor all patients for hypersensitivity reactions through symptom reporting, direct observation, and vital sign measurements. If a hypersensitivity reaction is suspected, immediately discontinue the injection and initiate appropriate therapy. LUMISIGHT is contraindicated in patients with a history of hypersensitivity reaction to pegulicianine [see Contraindications ( 4 )] . 5.2 Risk of Misdiagnosis False positive and false negative findings may occur during use of LUMISIGHT to detect residual cancer. Absence of signal in the lumpectomy cavity does not rule out the presence of residual cancer. Additionally, positive signal has been observed in some non-cancerous tissue [see Clinical Studies ( 14 )]. 5.3 Interference from Dyes Used for Sentinel Lymph Node Mapping Blue dyes used for sentinel lymph node (SLN) mapping procedures interfere with LUMISIGHT imaging. The potential of other dyes to interfere with LUMISIGHT imaging has not been evaluated. Avoid administration of dyes used for SLN mapping procedures before imaging the lumpectomy cavity in patients receiving LUMISIGHT [see Drug Interactions ( 7 )].

Side effects

The following clinically important adverse reactions are described elsewhere in the labeling: Anaphylaxis and Other Serious Hypersensitivity Reactions [see Warnings and Precautions ( 5.1 )] Most common adverse reactions (≥1%) were hypersensitivity and chromaturia. ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact Lumicell at 1-833-458-6387 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. The safety of LUMISIGHT was evaluated in 726 patients who received a single dose of 1 mg/kg of LUMISIGHT. Among these 726 patients, 703 (97%) had breast cancer and 23 (3%) had other types of cancer. The mean age of the patients was 62 years (range: 36 years to 95 years), and 98% of them were female. Distribution by race was 82% White, 7% Black or African American, 6% Asian, and 5% other or unreported. Distribution by ethnicity was 3% Hispanic/Latino, 93% non-Hispanic/Latino, and 4% unknown or unreported. Adverse reactions occurring in ≥ 1% of patients receiving LUMISIGHT were hypersensitivity (1.4%, including anaphylaxis [4 out of 726]) and chromaturia (85%). Chromaturia resolved within 48 hours after administration in 93% of patients, with the longest time to resolution of 15 days. Adverse reactions occurring in use < 1% of patients were skin discoloration after extravasation, nausea, dyspnea, pyrexia, and vomiting.

Drug interactions

Blue dyes used for SLN mapping procedures generate a fluorescent signal that interferes with the signal from LUMISIGHT when injected into the breast prior to imaging with LUMISIGHT. The potential of other dyes to interfere with LUMISIGHT imaging has not been evaluated. Avoid administration of dyes used for SLN mapping procedure before imaging the lumpectomy cavity in patients receiving LUMISIGHT.

Use in specific populations

8.1 Pregnancy Risk Summary There are no available data on pegulicianine use in pregnant women to evaluate for a drug associated risk of major birth defects, miscarriage, or other adverse maternal or fetal outcomes. Animal reproduction studies were not conducted with pegulicianine. The background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2% to 4% and 15% to 20%, respectively. 8.2 Lactation Risk Summary There are no data on the presence of pegulicianine or its metabolites in either human or animal milk, the effects on the breastfed infant, or the effects on milk production. The developmental and health benefits of breastfeeding should be considered along with the mother’s clinical need for LUMISIGHT and any potential adverse effects on the breastfed infant from LUMISIGHT or from the underlying maternal condition. 8.4 Pediatric Use Safety and effectiveness of LUMISIGHT in pediatric patients have not been established. 8.5 Geriatric Use Of 703 patients in clinical studies of LUMISIGHT for breast cancer who received the recommended dose of 1 mg/kg, 44% were 65 years of age and over, while 8% were 75 and over. No overall differences in safety or effectiveness have been observed between these patients and younger adult patients.

Description

(pegulicianine for injection) is an optical imaging agent for intravenous use. The chemical name of pegulicianine acetate is N-[6-(1-{2-[3,6-bis(2,3-dihydro-1H-indol-1-yl)xanthylium-9-yl]benzene-1-sulfonyl}piperidine-4-carboxamido)hexanoyl]glycylglycyl-L-arginyl-N6-(6-{2-[(1E,3E,5Z)-5-(1-ethyl-3,3-dimethyl-5-sulfonato-1,3-dihydro-2H-indol-2-ylidene)penta-1,3-dien-1-yl]-3,3-dimethyl-5-sulfonato-3H-indol-1-ium-1-yl}hexanoyl)-Llysyl-[2-(2-aminoethoxy)ethoxy]acetyl-S-[(3RS)-1-{6-[α-methylpoly(oxyethylene)-ω-amino]-6-oxohexyl}-2,5-dioxopyrrolidin-3-yl]-L-cysteinamide acetate with a molecular formula of C 116 H 147 N 19 O 23 S 4 (C 2 H 4 O) n , with n of approximately 450, a molecular weight of 20-25 kDa, and the following structural formula: Figure 1: Molecular structure of pegulicianine acetate LUMISIGHT is supplied as a sterile, dark blue lyophilized powder. Each vial contains 40 mg of pegulicianine (equivalent to 40.1 mg of pegulicianine acetate) and the following inactive ingredients: 3.2 mg of dibasic sodium phosphate heptahydrate, 39.5 mg of mannitol, and 3.8 mg of monobasic sodium phosphate monohydrate to permit withdrawal of 3.9 mL of pegulicianine 10 mg/mL upon reconstitution with 4 mL of 0.45% sodium chloride injection, USP. The pH of the reconstituted solution is 6 to 7. image description

How supplied

How supplied LUMISIGHT (pegulicianine) for injection is supplied as a dark blue lyophilized powder for reconstitution in a clear, glass single-dose vial in cartons of 10 vials (NDC 82292-040-10). After reconstitution, each vial delivers 39 mg pegulicianine. Storage and Handling Store vials of LUMISIGHT frozen at -25°C to -15°C (-13°F to 5°F) in the original carton to protect from light.

Patient information

Anaphylaxis and Other Serious Hypersensitivity Reactions Inform patients of the risk of hypersensitivity reactions, including anaphylaxis, and instruct them to alert healthcare providers immediately if they experience signs and symptoms of a hypersensitivity reaction [see Warnings and Precautions ( 5.1 )]. Urine Discoloration Inform patients that LUMISIGHT may cause blue discoloration of the urine that in most cases will resolve within 48 hours [see Adverse Reactions ( 6.1 )]. Skin Discoloration After Extravasation Inform patients that if extravasation occurs, it may result in blue discoloration of the skin at the injection site that will be evident for several weeks [see Adverse Reactions ( 6.1 )].

Label text from the FDA structured product label by Lumicell, Inc. (revised Jan 9, 2026). Long sections are shortened; the complete label is on DailyMed.

Active ingredients

Lumisight NDC products (1)

NDCStrength & formLabelerType
82292-040Pegulicianine 10 mg/mL
Injection, Powder, Lyophilized, For Solution
Lumicell, Inc.NDA

Frequently asked questions

What is Lumisight used for?

1 INDICATIONS AND USAGE LUMISIGHT is indicated for fluorescence imaging in adults with breast cancer as an adjunct for the intraoperative detection of cancerous tissue within the resection cavity following removal of the primary specimen during lumpectomy surgery. LUMISIGHT is an optical imaging agent indicated for fluorescence imaging in adults with breast cancer as an adjunct for the…

What are the side effects of Lumisight?

The following clinically important adverse reactions are described elsewhere in the labeling: Anaphylaxis and Other Serious Hypersensitivity Reactions [see Warnings and Precautions ( 5.1 )] Most common adverse reactions (≥1%) were hypersensitivity and chromaturia. ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact Lumicell at 1-833-458-6387 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.… See the full label for the complete list.

Who makes Lumisight?

Lumisight is listed by 1 labeler in the FDA NDC directory, including Lumicell, Inc..